Malarkey Roofing Products – Asphalt Shingles, Torch-On, and TPO Systems  in Vancouver

Looking for shingles that actually stand up to Vancouver’s moody weather? Malarkey is a smart pick. Headquartered in Oregon with deep distribution across Western Canada, the brand is built for the Pacific Northwest—our rain, our wind, our salt air. That regional fit matters. Lighter, drier-climate products often fail early here; Malarkey’s lines are engineered for the coast.

The headline advantage is the rubberized asphalt technology. Instead of conventional asphalt alone, Malarkey blends polymers that add flexibility and grip. Translation: shingles seal faster in cool, damp conditions, resist granule loss, and stay pliable when temperatures swing. Pair that with industry-leading Class 3–4 impact ratings and you’ve got a roof that shrugs off wind-driven rain, winter freeze-thaw, and the odd hail event—exactly what homes from Surrey to North Van to Coquitlam deal with each year.

Eco credentials? Strong. The rubberized formulation incorporates upcycled materials, helping divert waste while improving performance. For Metro Vancouver homeowners trying to balance durability with sustainability, that’s a win. And because better-sealing, tougher shingles reduce callbacks and replacements, you’re also cutting lifecycle waste and truck rolls—another quiet environmental plus.

Aesthetics are equally dialed-in. Malarkey’s architectural profiles deliver real curb appeal: dimensional shadow lines, crisp tabs, and colour blends that complement everything from modern infills in Burnaby to West Coast cedar and stucco classics in Richmond. You’ll find versatile palettes—charcoals, coastal greys, earthy browns, bold blacks—so it’s easy to match gutters, fascia, and exterior paint without fighting undertones. Want understated? Go cool grey. Want presence from the street? Deep, high-contrast blends do the trick.

Longevity and support round it out. Malarkey backs its premium lines with robust limited lifetime warranties and enhanced wind protection when installed to spec. In practice, that means fewer worries when the Pineapple Express rolls through, and better coverage if something does go sideways. As a roofer working across Metro Vancouver, we also like the installer-friendly details—strong nailing zones and consistent shingle geometry—which help deliver clean lines and tight seals on real-world roofs, not just in brochures.

Bottom line: Malarkey gives Metro Vancouver homeowners a high-performance, coastal-ready shingle that looks sharp, lasts longer, and aligns with greener building choices. If you’re planning a roof replacement in Burnaby, Surrey, Coquitlam, or anywhere in the Lower Mainland, Malarkey belongs on your shortlist.

Why Choose Malarkey Roofing Products

Residential | Commercial | Strata | Multifamily Complexes

Ready To Help YOU!

Malarkey Asphalt Shingle Collections

Legacy® Architectural Shingles (Premium)

Built with rubberized SBS-modified asphalt, Legacy handles Metro Vancouver’s wet, windy seasons without cracking or granule loss. The added flexibility helps absorb impact from wind-borne debris and pinecones common around North Shore and Tri-Cities properties. Scotchgard™ protection fights algae streaking—a real issue in our shaded, moisture-heavy neighborhoods—keeping curb appeal sharp for years. With a limited lifetime warranty and high wind rating, Legacy suits homeowners who plan to stay put and want a thicker, upscale profile that elevates resale value on quiet Burnaby and Coquitlam streets alike.

Best fit: Long-term family homes prioritizing durability + a refined architectural look.

Windsor® Designer Shingles (Ultra-Premium)

Windsor’s oversized, sculpted tabs mimic hand-split cedar or quarried slate—perfect when you want “estate” presence without cedar roof maintenance. It carries a Class 4 impact rating and 130 mph wind warranty, translating into superior performance during Pacific fronts and occasional outflow winds. If your West Vancouver or Shaughnessy home demands bolder shadow lines, Windsor delivers head-turning depth while maintaining the weathering resilience Malarkey is known for.

Best fit: Custom and high-end homes seeking luxury aesthetics plus maximum protection.

Vista® Architectural Shingles (High-Performance Mid-Tier)

Vista balances price and performance for Metro Vancouver’s typical detached homes. The Advanced Zone® nailing area improves installation accuracy and wind uplift resistance—important on exposed ridgelines from Surrey to Port Moody. You get reliable weathering, solid warranty coverage, and cleaner lines than entry products—without pushing the budget into premium territory.

Best fit: Families wanting strong ROI: dependable protection, clean architectural style, fair price.

Highlander® NEX™ (Entry / Value)

For rentals, secondary suites, or cost-sensitive projects, Highlander brings NEX® rubberized asphalt into an approachable package. You still benefit from better granule adhesion and cold-weather flexibility compared to basic 3-tabs, with a 30-year limited warranty. Expect fewer designer flourishes and a shorter service life than Legacy or Windsor—but a very smart upgrade over low-end options in our damp coastal climate.

Best fit: Entry-level re-roofs, investment properties, budget-driven timelines.

Comparing Malarkey’s Premium Lines

Here’s a quick, at-a-glance comparison tailored to Metro Vancouver homeowners weighing style, longevity, and value.

*Coastal rain, shade, and moss pressure in our region can shorten or extend life depending on ventilation, underlayment, and maintenance.

How to choose in Metro Vancouver

Budget first?

• Tight budget, solid performance: Highlander gets you into an architectural profile without breaking the bank.
• Best value over time: Vista balances cost with stronger curb appeal and algae resistance.
• Premium ROI: Legacy adds SBS-modified durability and a richer look at a mid-premium price.
• Statement roof: Windsor delivers designer lines that elevate high-visibility homes and luxury streetscapes.

Curb appeal goals

• Clean architectural texture: Vista/Legacy.
• Distinct, high-shadow definition for upscale neighborhoods: Windsor.
• Uniform neighbourhood match or strata sensitivity: Highlander/Vista (popular, widely approved profiles).

Micro-climate guidance

Port Moody (rain + shade + moss):

• Prioritize algae resistance, SBS-modified toughness, and robust ventilation. Legacy excels under persistent damp; Vista is a smart mid-tier pick. Add ridge/soffit venting and a self-adhered eave/valley underlayment.

Burnaby (mixed exposure, wind channels, tall trees):

• Choose shingles with strong sealant bonds and impact resilience. Legacy offers a durability sweet spot; Windsor if you want premium look plus heft against debris. Specify high-flow gutters and leaf protection.

Delta (sun + coastal wind + salt air):

• Heat cycling and gusts reward heavier, SBS-modified options. Legacy or Windsor reduce granule loss and uplift risk. Use corrosion-resistant flashings and verify fastener spec for coastal zones.

Pro tip: In all three areas, pair your shingle choice with upgraded underlayments, balanced attic ventilation, and zinc/aluminum strips at the ridge to curb moss—small upgrades that pay off big in our climate.

Malarkey Torch-On and Low-Slope Roofing Systems

SBS-Modified Bitumen Built for Metro Vancouver

SBS-modified bitumen membranes are the gold standard for flat and low-slope roofs in our rainy, coastal climate. By blending asphalt with styrene-butadiene-styrene (SBS), Malarkey membranes gain elastic flexibility, superior adhesion, and crack resistance—critical when temperatures swing from damp winters to warm summer highs across Metro Vancouver. The result: a roof that expands and contracts without fatigue, maintains watertight seams, and stands up to daily UV exposure.

Two-Ply Torch-On Assemblies for Leak-Proof Longevity

A classic two-ply torch-on build—base sheet plus cap sheet—creates a redundant, self-healing system. Torch-welded laps fuse sheets into a continuous membrane with minimal joints and no fastener penetrations. Add granular, UV-stable cap sheets for durability, and you get decades of performance with low ongoing maintenance. Whether it’s a re-roof over sound substrate or a full tear-off and rebuild, Malarkey’s assemblies are engineered for predictable, long-term protection.

UV, Ponding, and Freeze–Thaw: Designed for Real-World Abuse

Metro Vancouver roofs see it all: relentless rain, intermittent ponding on older decks, sun breaks that spike surface temps, then winter freeze–thaw cycles. Malarkey’s SBS cap sheets resist UV degradation, remain flexible in the cold, and tolerate incidental ponding better than traditional felts. Reinforcements deliver tensile strength against foot traffic and equipment vibration—perfect for buildings with frequent rooftop access or mechanical units.

Warranty Coverage & RCABC Compatibility

Malarkey torch-on systems are compatible with RCABC-accepted practices and details, supporting compliance for commercial and multi-family projects across the Lower Mainland. When installed by qualified crews following manufacturer and RCABC guidelines, you can secure robust material warranties and optional extended coverage on complete assemblies. Clear documentation, registered products, and proper substrate prep keep your warranty intact and your risk low.

Ideal for Commercial & Multi-Family Roofs

Shopping plazas in Burnaby, mixed-use buildings in Surrey, strata complexes in Coquitlam, and institutions across Vancouver benefit from the same strengths: fast, flame-applied welding for strong seams, layered redundancy, and serviceable surfaces that make inspections and repairs straightforward. For low-slope transitions, parapet tie-ins, and penetrations, compatible flashings and primers deliver neat, code-compliant detailing.

Why Choose Malarkey for Low-Slope?



• Proven SBS chemistry for flexible, watertight performance
• Two-ply redundancy to minimize leak risk over time
• UV-stable cap sheets to slow aging in sunny exposures
• RCABC-aligned details and strong warranty pathways
• Built for Vancouver’s rain, wind, and temperature swings

Looking to spec an assembly for your Metro Vancouver project? We can match Malarkey torch-on systems to your deck type, insulation, and drainage plan for a durable, inspection-friendly roof that’s built to last.

IKO TPO Single-Ply Roofing Systems

Why Paragon Roofing BC Recommends Malarkey

Decades in Metro Vancouver, Thousands of Squares Installed

When you roof day-in, day-out in a rainforest city, you learn what survives—and what doesn’t. Over the past two decades, our crews have installed Malarkey shingles across Metro Vancouver—North Shore slopes, Burnaby and Coquitlam cul-de-sacs, Delta wind corridors, Richmond waterfronts, and Vancouver’s heritage pockets. The reason we keep specifying Malarkey is simple: field performance. Their SBS/NEX® polymer-modified asphalt gives shingles real flex in cold, real grip in wind, and real resilience under year-round moisture. That translates into fewer granule-loss callbacks, tighter seals after our first sunny stretch, and roofs that still look sharp long after their neighbours dull out.

RCABC-Compliant Installs = Full Warranty, Zero Headaches

A premium shingle is only as good as the install beneath it. We build every Malarkey system to RCABC-compliant standards—starter, underlayment, fastener patterns, hip & ridge, and proper ventilation—so you get manufacturer coverage without fine-print gotchas. Our checklists are Vancouver-specific:

• 3:12–4:12 low slopes get the right underlayment strategy.
• Eave, valley, and wall transitions are detailed for rain-on-rain weeks.
• Marine zones (Kits, White Rock) are flashed and sealed with salt-air in mind.
  Pair RCABC practices with Malarkey’s class-leading features—like enhanced nailing zones and robust seal strips—and you have a roof that’s built to pass inspections today and storms tomorrow.

Case Studies: Built for Rain, Proven in Wind

North Shore (15+ years): A Vista® install in Lynn Valley has endured freeze-thaw, atmospheric rivers, and heavy canopy drip. Gutters need cleaning; shingles don’t. The ridge still sits tight, no lifted tabs, no shingle curl—zero wind-related service calls.

South Delta (10+ years): Highlander® NEX on a south-facing two-storey, exposed to gusts that whip down 56th Street. After a monster November storm, we inspected: fasteners held, seals intact, ridge caps unshaken. Homeowner upgraded attic vents later; the roof system didn’t need a thing.

East Vancouver Strata (8+ years): Legacy® on multiple low-slope transitions with complex step flashings. Heavy winter rains? No capillary creep, no staining at sidewalls. Routine moss management, yes—membrane intrusion, no.

These aren’t brochure claims—they’re roofs we installed, still performing. Add Malarkey’s smog-reducing granules and upcycled content and you get durability that also checks the sustainability box—a growing priority for Metro Vancouver homeowners and strata councils.

Bottom line: In our climate, shortcuts get exposed fast. Malarkey’s material science plus Paragon’s RCABC-compliant installation delivers the quiet kind of success—a roof that doesn’t need you to think about it, especially when the rain won’t quit and the winds pick up.

Sustainability & Green Roofing Advantages

Metro Vancouver’s climate is wet, coastal, and getting warmer—so “green” can’t just be a buzzword; it has to perform. Malarkey’s eco-forward shingle technology delivers practical environmental gains without sacrificing durability in Burnaby, Surrey, Coquitlam, Richmond, and beyond.

Real-world upcycling: plastics and rubber kept out of landfills

An average Malarkey roof can reuse up to 3,200 plastic bags and 5 rubber tires—materials that would otherwise clog landfills or break down into microplastics. That reclaimed content becomes part of a tougher, polymer-modified shingle matrix built to handle Metro Vancouver’s freeze-thaw cycles, wind, and relentless rain. The result? A cleaner waste stream today and fewer premature replacements tomorrow.

Cool Roof & ENERGY STAR® options to cut heat gain

Heat domes aren’t theoretical anymore. Malarkey’s Cool Roof and ENERGY STAR® rated options use reflective surface technology to bounce a meaningful portion of solar radiation, helping the roof stay cooler. In practice, that can:

• Reduce attic temperatures, easing the load on whole-home ventilation.
• Stabilize indoor comfort during summer spikes across the Lower Mainland.
• Support lower HVAC use, especially in sun-exposed Delta, Langley, and South Surrey neighborhoods.

Pair cool-roof shingles with balanced attic ventilation and proper underlayment and you’ve got a coastal-ready assembly that manages moisture and moderates heat—two pillars of building durability here.

Lower life-cycle footprint vs. conventional asphalt

Sustainability isn’t just about ingredients; it’s about the whole life cycle. Malarkey’s formulation and construction practices aim for longer service life and tighter performance in harsh, wet climates. When a roof lasts longer, you:

• Defer manufacturing impacts (fewer shingles produced over decades).
• Reduce transport emissions (fewer deliveries to your site).
• Send less material to landfills (fewer tear-offs).

Add in recyclable and upcycled content at the front end and the math tilts further in your favor. For strata complexes, commercial sites, and single-family homes, that translates to measurable environmental and budget wins.

Green advantage at a glance

Why this matters for Metro Vancouver homes

From Kitsilano to Port Moody, roofs wrestle with salt air, wind-driven rain, and shaded, moss-prone conditions. Choosing shingles that upcycle waste, reflect heat, and hold up longer in damp weather reduces your home’s operational and embodied carbon—while protecting your attic, sheathing, and insulation from moisture-driven failures.

Bottom line: Malarkey’s sustainability story isn’t marketing fluff—it’s a system that aligns with Vancouver’s climate realities and your long-term costs. If you’re planning a replacement, ask about cool-roof colors, ventilation balance, and underlayment upgrades to maximize both performance and planet benefits.

Frequently Asked Questions.

Asphalt shingle installations are traditional, but for good reason. Here's a little more about them.

Where We Go.

Proudly serving our local community & focused on being the best Vancouver roofers possible.

Here's What Our Existing Clients Think.

Home and business owners we've served across the greater Vancouver area.

We look forward to helping you.

For all your roofing needs, contact Paragon Roofing BC — call, text, or email us at  604-358-3436